Beschreibung

– Lightbee Kabelsatz inklusive –

EBMX X-9000 V3 Technical Specifications

(VIEW THE GENERAL INFO PDF)
(VIEW THE WHEEL LIFT ASSIST INFO PDF)

NOTE:
-If you are using an OEM Surron motor you can safely run 12KW of power. We have been running 14KW on an OEM motor with 72V for over 2 years!
-If you are using a stock Surron battery you can safely run 7.5kw of power (non bypassed). Anything higher will result in unsafe voltage sage.

Controller Specs

• Rated Power: 50kW (Tested up to 60kW)
• Phase Current: 1000A Continuous / 1600A Burst (Race Mode)
• Battery Current: 500A Max Line Current
• Input Voltage Range: 40V – 110V
• Operating Voltage Range: 48V – 110V (26S)
• Max Efficiency: >95%
• Motor Control Protocol: Field Oriented Control (FOC)
• Firmware: VESC-Based, Custom Modified by EBMX per bike model
• Operating Temperature Range: -25°C to 80°C (-13°F to 176°F)
• Waterproof Rating: IP67
• IO Count: 68 Inputs/Outputs

Construction & Hardware

• MOSFETs: 30 x 120V Infineon
• PCB: Multilayer design with CNC copper busbars
• Case: Full CNC Alloy Case, Built for Harsh Conditions
• Cooling: Optional Liquid Cooling Support
• Connectors: Robust CNC Machined Terminals & Connections
• Power Distribution: Billet CNC Bus Bar System

Power Modes & Control

• 6 Fully Customizable Power Levels (e.g., Race, Street)
• Graphical Power UI with:
  • Street / Race Mode Toggle
  • Regen Tuning
  • Speed Limit Adjustments
  • Field Weakening Settings
• Adjustable power level sliders per mode (e.g., Level 1, 2, 3)

Input & Sensor Integration

• Throttle: Dual Hall Throttle Support (2x ADC inputs)
• Wheel Lift Assist: Integrated IMU with programmable launch, stunt, anti-loop modes
• Sensor Protocols: CAN, RS485, UART, PWM In/Out
• Other I/O: Regen Throttle / E-Clutch Integration, Full Display & Sensor Support

Software & App Interface

• EBMX X-Series App:
  • Bluetooth App Connection
  • Complete setup in minutes
  • Live tuning at track or trail
  • Quicker diagnostics and updates
  • OTA Firmware & Compatibility Expansion
  • Future-ready: Compatible with EBMX Track Module, DC-DC, and more

Kit Contents

• Plug & Play Harness
• Mount Kit for Selected Bike
• SW102T Color Display
• 1-2 Harness
• Bluetooth Module
• Thumb Throttle
• Heat Sink and Hardware

Motor Compatibility

• EBMX XLB, XUB, XTA Series
• KO Technologies Motors
• QS Motors: QS138, QS165
• Sotion, Eride, Rerode, and more
• Hall and Encoder Configurations – Plug-and-play, no rewiring needed

Bike Compatibility

• Surron Lightbee & Ultra Bee
• Talaria MX3, MX4, MX5, XXX
• E-Ride Pro S, 2.0, 3.0, SR
• Rerode R1
• 79Bike
• Many other custom setups supported

EBMX X-9000 V3 Wheel Lift Assist System

Overview

• Wheel Lift Assist (WLA) is developed in-house by EBMX using real-time IMU data.
• The system can reduce or modulate throttle and apply regenerative braking based on user-defined settings.
• WLA is fully rider-tunable for stunting, launching, or anti-rotation control.
• Important: WLA will never apply throttle on its own. It only reduces throttle and applies braking through logic-based intervention.

Activation & Setup

• Accept the waiver and enable WLA via the EBMX app.
• Double-tap the „On“ button on your display to activate WLA (display icon may vary).
• Set the IMU level using Level 0 to activate Auto Horizon calibration.
• Auto Horizon delay is adjustable between 0–30 seconds or can be disabled.

Throttle Off Set Angle

• Defined angle where throttle is cut completely.
• Within 10° of this angle, modulation is aggressive.
• Recommended to set beyond your intended balance point to prevent premature throttle cut-off.
• Default setting for launching is 50°, with increased Modulation Control Percentage for responsiveness.

Start Set Angle

• Angle at which throttle modulation begins (detected by IMU).
• Suggested 10–15° for heavier bikes to allow natural lift before modulation starts.
• Lower values = smoother, earlier modulation. Higher values = more delayed engagement.
• Minimum 30° gap is required between Start Set Angle and Throttle Off Set Angle.

Maximum Set Angle

• Angle where regenerative braking is applied (if Braking Force is enabled).
• Braking strength is determined by settings in Power Modes & Levels.
• Braking effect varies by motor and battery system.
• If Braking Force is disabled, no action occurs at this angle.

Braking Force Percentage

• Defines how much regenerative braking is applied at the Maximum Set Angle.
• Highly effective when used with aftermarket batteries.

Auto Horizon Timer

• When in Level 0, the IMU levels itself automatically based on this delay timer.
• Customizable between 0 and 30 seconds or can be disabled entirely.

Modulation Control Percentage

• Controls how much throttle is reduced when modulation is active.
• Lower percentage = more throttle = more aggressive response.
• Higher percentage = less throttle = smoother response.

Speed

• Optional setting to automatically deactivate WLA when a set speed is exceeded.

Rise Aggression

• Uses IMU angle speed and acceleration to adjust modulation behavior.
• Lower setting = faster rotation.
• Higher setting = slower, more controlled lift.
• Works in balance with Modulation Control % for launch control tuning.
• Recommended: keep at default and tune using Modulation % if you’re new.

Timer

• Specifies how long WLA remains in control of the wheel lift event.